Installing and Removing the PCI Riser Assembly
Removing the PCI Riser Assembly
To remove the PCI riser assembly, use the following instructions.
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the processor air duct by lifting straight up.
5.Disconnect any cables attached to any
6.Grasp both riser latches with thumb and forefinger (see letter “A”), and pull up to release riser assembly.
7.Lift riser assembly straight up (see letter “B”).
A
A
B
AF000358
Figure 38. Removing PCI Riser Assembly from the Server System
Intel® Server System SR1500AL User’s Guide | 47 |
