Installing and Removing the Server Board
Installing the Server Board
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the processor air duct. For instructions, see “Removing the Processor Air Duct”.
5.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly”.
6.Place the server board into the server system as shown in the figure below (see letter “A”).
7.Attach the server board with six screws (see letter “B”).
B
A
AF000379
Figure 52. Installing the Server Board
62 | Intel® Server System SR1500AL User’s Guide |
