8.Install the PCI riser assembly. For instructions, see “Installing the PCI Riser Assembly”.
9.Install the processor air duct. For instructions, see “Installing the Processor Air Duct”.
10.Install the server system cover. For instructions, see “Installing the System Cover”.
11.Plug all peripheral devices and the AC power cable(s) into the server.
Removing the Server Board
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the server system cover. For instructions, see “Removing the System Cover”.
4.Remove the processor air duct. For instructions, see “Removing the Processor Air Duct”.
5.Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser Assembly”.
6.Remove the six screws from the server board (see letter “A”) and lift the server board from the server system (see letter “B”).
A
B
AF000380
Figure 53. Removing the Server Board
Intel® Server System SR1500AL User’s Guide | 63 |
