ADDENDUM TO ISSUE 4 OF THE AXXESS MANUALOCTOBER 1997
Page 10 of 73
Station Password
Astation password has been added to the system. This
password is used for the new Remote Programming
feature.
The station password can be upto 8 digits in length.
The default password isthe extension number of the
station. The passwordcan be changed by entering the
ProgramStation Password feature code at the stationor
whenusing the new Remote Programming feature (de-
scribed in detail on page 12). It can also be pro-
grammed through Individual Station programming, as
described on page 12.
If the new passwordis programmed from a station, the
user will be prompted for the old password, then the
newpassword, and will be asked to veri fy the new pass-
word. If it is programmed through Remote Program-
ming,the user will already have entered a correctpass-
word, so the user is only prompted for the new
password and will be asked to verify the password.
Should the verified password and new password not
match, the old password will be retainedand the pro-
gramming sessioncanceled.
TOCHANGE THE STATION PASSWORD FROM YOUR STATION:
(4) Enter the Program Station Password feature
code(392). You hear a confirmation tone. If you
have a display, it shows ENTER PASSWORD.
(5) Enter your current password, followed by #. (At
defaulti t is your extension number.) If you have
a display, it shows NEW PASSWORD.
NOTE: If youenter an incorrect password, the
display will show INVALID PASSWORD a nd
your station will return to the idle state.
(6) Enterthe new password followedby #. You hear
a confirmation tone.
(7) Enter the new password again forverification
followed by#. Youhear a confirmation tone. If
you have a display, it shows PASSWORD
SAVED. Your station returns to the idle state.
TO CHANGE THE STATION PASSWORD USING REMOTE PRO-
GRAMMING:
(1) If calling from an outsidetelephone, access the
systemt hrougha DISA line. Enter the DISA se-
curitycode (if applicable). You hear a confirma-
tion tone.
If programming from another station, lift the
handset or press the SPKR key.
(2) Enter the Remote Programming feature code
(359).You hear a confirmation tone. If you have
a display, it shows ENTER EXTENSION.
(Executive Keyset users can press the IC DIR
key to use the intercom directory to look up a
number.)
(3) Enter the extension to be programmed. You
hear a confirmation tone. If you have a display,
it shows ENTER PASSWORD. If you entered
aninvalid extension number, you will hear reor-
der tones and can try again.
(4) Enter the extension’s password followed by #.
You hear a confirmation tone.
NOTE: If youenter an incorrect password, the
display will show INVALID PASSWORD. Out-
sidecallers will be returned to dial tone and sta-
tions will return to the idle state.
(5) Enter the Program Station Password feature
code(392). You hear a confirmation tone. If you
have a display, it shows NEW PASSWORD.
(6) Enter the new password, followed by #. You
hear a confirmation tone.
(7) Enter the new passwordagain for verification,
followed by#. Youhear a confirmation tone. If
you have a display, it shows PASSWORD
SAVED. Outside callers will hear dial toneand
stations return to the idle state.
The Program Station Password feature code (392) is
now included in the Extensions,Usernames, and Fea-
ture Codes programming screen.
There is also a Station Passwordcommand button in
Individual Station Information, Miscellaneous Station
Information screen that allows the programmer to
change the password, as shown on the next page.