ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997
Page 19 of 73
(4) Choose the Avdap service account from the
Names list. Select the Add button to add this
name.
(5) Select OKto exit to theLocal GroupProperties
window.
(6) Select “User Rights” from the Policies drop-
down menu.
(7) Check the box in the lower left corner to “Show
Advanced User Rights.”
(8) Select “Log on as a batch job” from the Right
drop-down list, then select the Add command
button.
(9) Choose the Avdap account from the “Names”
list and select the Add command button.Then
select OK.
(10) Select OK to exit the User Rightswindow.
(11) Exit the User Manager program.
There are two ways you can start the Avdap service
manually:
•OpenServices inside the Control Panel. Select the
“Avdap” service andselect the Start button.
•Open acommand shell, then type: net start avdap
Thereare threeways you can shut down the Avdapser-
vice manually:
•From the avdapmon window (see next section),
type ~ (tilde).
•OpenServices inside the Control Panel. Select the
“Avdap” service andselect the Stop button.
•Open acommand shell, then type: net stop avdap
AvdapMon Utility:Because the AXXESSORY Talk
softwareis running as a service,it does not have a con-
sole for displaying output. Inter-Tel provides a stand
aloneprogram called “AvdapMon” that can be used for
viewing the AXXESSORY Talk software messages.
The setup program automatically creates a shortcut to
Avdapmon in the AXXESSORY Talk programming
group in the Programs folder.
Avdapmon uses a TCP/IP socket to connect to the
AXXESSORY Talk software. It can be run from the
AXXESSORY Talk PC itself or any other PC running
WindowsNT or Windows 95, as long as there is a TCP/
IPnetwork connection from the PC running the Avdap-
Monutility to the AXXESSORY Talk PC. Note that the
software supportsonly one active AvdapMon connec-
tion.
This program has the following parameters:
avdapmon <IP number> <socket number>
The <IP number>i s the IP number of the AXXESSO-
RYTalk PC in “dotted notation” (e.g. 190.253.11.210).
The <socketnumber> is the socket number of the Av-
dap service. If not configured differently, the default
socket number is 4444.
If the AvdapMon utilityis run on the AXXESSORY
TalkPC itself, there is a shortcut notation to specify the
IP and port numbers. In this case, simply type avdap-
mon . . (that is: avdapmon followed by a space, a peri-
od, a space, and a period again).
To protect the AXXESSORY Talk against unautho-
rizedaccess through AvdapMon, a password can be re-
quired to use the AvdapMonutility. This password is
set through Database Programming (see page 27).
Registry Information: AXXESSORY Talk 4.3 now
uses WindowsNT Registry to store the command line
options.To modify values in the Registry, use theWin-
dows NT registry editor program called RE-
GEDT32.EXE.
CAUTION:This registry configurationis not a partof
thesoftware confi guration. It is included here for diag-
nostic and troubleshooting purposes only. Under nor-
malcircumstances, you should never need to access the
registry settings. This procedure should only be per-
formed by a trained installer;modifying the registry
valuesimproperly c an damage Windows NT configura-
tion and render it unusable.
To modifythe Avdap parameter in the registry, follow
these steps:
(1) Run the registry editor program by typing
regedt32 from a command prompt or select the
Start button, select Run, and type regedt32 in
the Open line.
(2) Select the HKEY_LOCAL_MACHINE win-
dow and locate the subkey called “Software.”
Open the Software subkey.
(3) Locate and open the subkey called “Inter-Tel.”
(4) Locate and select the Avdap subkey.
(5) Inside this subkey is a value called “Parame-
ters.” The type of this value is REG_MUL-
TI_SZ. Edit the value.
(6) Youwill see a windowcalled Multi-String Edi-
torthat permits you to add or remove the Avdap
command option. Note that each option hasto
appear a separate line. To add a new option,
simply type it in on a new line. To remove an
option, delete its line.
(7) When finished, select the OK button.
(8) Exit the registry editor program. The registry
will be saved automatically.