ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997
Page 35 of 73
Explanation of Extended Ring Cadences
The following table explainsthe difference between standard and extended ring cadences for the varioustypes of
single-line devices usedon the AXXESS Syst em in the United States. (The flag for enabling Extended Ring Ca-
dences is described on page 6–32 of the AXXESS manua l.)
SINGLE-LINE DEVICE CADENCE TYPE DESCRIPTION
SLA, SLC, SLC-16, or T1 OPX Standard IC Ring This is a repeating 2-second cadence that rings
twice. Each ring lasts 200 ms and isseparated
from the next ring by 400 ms of silence. The
remaining 1.2 seconds is silent.
Extended IC Ring This is a repeating 6-secondcadence that rings
twice. Each ring lasts 800 ms and isseparated
from the next ring by 400 ms of silence. The
remaining 4 seconds is silent
Standard CO Ring This is a repeating 6-secondcadence that rings
once for 2 seconds followed by 4 seconds of
silence.
Extended CO Ring This is a repeating 6-second cadence that rings
once for 2 seconds followed by 4 seconds of
silence.
Digital Keyset MDPM Standard IC Ring Thiscadence has two 250 ms rings every 2
seconds.
Extended IC Ring This is a repeating 3-secondcadence that rings
once for 1 second followed by 2 seconds of
silence.
Standard CO Ring This is a repeating 6-secondcadence that rings
once for 2 seconds followed by 4 seconds of
silence.
Extended CO Ring This is a repeating 6-second cadence that rings
once for 4 seconds followed by 2 seconds of
silence.
Analog Keyset Data Port Module Standard IC Ring This cadence rings for 1024 milliseconds fol-
lowed by 2048 milliseconds of silence.
Extended IC Ring This is a repeating 2-secondcadence that rings
twice. Each ring lasts 200 ms and isseparated
from the next ring by 400 ms of silence. The
remaining 1.2 seconds is silent.
Standard CO Ring This is a repeating 6-secondcadence that rings
once for 2 seconds followed by 4 seconds of
silence.
Extended CO Ring Same as Standard CO Ring cadence.