OPERATION
PROCEDURE 3 |
| OPERATION |
BRAKE RELEASE LEVER | TOP VIEW OF | REAR VIEW OF |
| TILLER SHROUD | SCOOTER |
CAUTION |
|
|
Ensure that the |
|
|
is in the ON position (engaged) |
|
|
before driving. There should be an |
|
|
audible "click" when stopping and |
| Brake Arm |
starting. |
| |
|
| |
|
|
|
|
|
|
tween the rear shroud and the rear wheel. For all models except
ALL MODELS EXCEPT PANTHER MX-4 (FIGURE 7)
Normal driving position for the brake is the ON (lever DOWN) position. Activation of
the throttle control lever automatically |
| |
releases the brake so the powered |
| |
scooter can drive. Releasing the throttle |
| |
control lever automatically engages the | Brake Release Lever | |
brake so the powered scooter will not roll | ||
| ||
on its own. | F | |
F | ||
| O |
Brake release lever OFF (lever UP) and the key removed allows the powered scooter to be pushed. The powered scooter cannot be driven with the brake in the OFF (lever UP) position.
PANTHER MX-4 ONLY (FIGURE 8)
➠ | Rear of |
O | |
➠ |
|
N |
|
| Scooter |
NOTE: Remove key and disengage brake before manually pushing the scooter.
FIGURE 7 - BRAKE RELEASE LEVER
- ALL MODELS EXCEPT
PANTHER MX-4
Normal driving position for the brake is the ON (lever UP) position. Activation of the throttle control lever automatically releases the brake so the powered scooter can drive. Releasing the throttle control lever
automatically engages the brake so the powered scooter will not roll on its own.
Brake release lever OFF (lever DOWN) and the key removed allows the powered scooter to be pushed. The powered scooter cannot be driven with the brake in the OFF (lever DOWN) position.
Brake Release Lever
FIGURE 8 - BRAKE RELEASE LEVER
- PANTHER
Invacare Scooters | 24 | Part No. 1090132 Rev F |