Invacare LYNX LX-3, PANTHER MX-4, PANTHER LX-4, LYNX SX-3 Armrest Angle Adjustment, Armrest Width

BACK

PROCEDURE 7 ARMS

This Procedure Includes the Following:

Armrest Angle Adjustment

Armrest Width Adjustment

Armrest Depth/Height Adjustment

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise, injury or damage may result.

ARMREST ANGLE ADJUSTMENT

ALL SEATS BUILT AFTER 10/		Armrest
00 AND CONTOUR
SEATS BUILT BEFORE 10/00
(FIGURE 1)		Mounting
1.	Lift the armrest up.	Screw
2.	Loosen adjustment locknut.	Adjustment
3.	Adjust mounting screw up or down to
		Locknut
	the desired arm angle position.	FIGURE 1 - ARMREST ANGLE
4.	Retighten adjustment locknut.
		ADJUSTMENT - ALL SEATS BUILT
5.	To determine the same angle for the
		AFTER 10/00 AND CONTOUR
	opposite armrest, count the exposed
		SEATS BUILT BEFORE 10/00
	threads on the socket screw.
6.	Repeat STEPS 1-5 for opposite armrest.

ARMREST WIDTH	MEASURE THIS
ADJUSTMENT	DISTANCE
ALL MODELS EXCEPT ZOOM-3
(FIGURE 2)		Armrest
1. Loosen the adjustment knob located
either beneath the seat frame or on
the back of the seat frame.
2. Adjust armrest in or out to the desired
position.
CAUTION		Seat
The armrest can be adjusted to a	Adjustment Knob	Frame
maximum distance of 4-1/2 inches	NOTE: Only Contour Seat shown for clarity.
between the inside of the armrest
and the mounting shaft the armrest	Width adjusts in the same manner for Deluxe
is inserted into. If the armrest is	Seat.
	FIGURE 2 - ARMREST WIDTH
adjusted beyond the maximum 4-1/	ADJUSTMENT
2 inches, it will fall out.

3.Retighten adjustment knob securely.

4.Measure distance between back and inside of armrest.

5.Repeat STEPS 1-4 for opposite armrest setting armrest at distance determined in

STEP 4.	42	Part No. 1090132 Rev F
Invacare Scooters