SAFETY INSPECTION/MAINTENANCE

This Procedure Includes the Following:

Safety Inspection Checklist

Maintenance

Troubleshooting

NOTE: Every six (6) months take the scooter to a qualified technician for a thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of the scooter. To operate properly and safely, the scooter must be cared for just like any other vehicle.

Routine maintenance will extend the life and efficiency of the scooter.

Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow these maintenance procedures:

ITEM

INITIALLY

 

INSPECT/ADJUST

 

 

WEEKLY MONTHLY PERIODICALLY

 

 

 

 

 

GENERAL

 

 

 

 

Scooter drives straight (no excessive

 

 

 

 

drag/pull to one side).

X

 

 

X

 

 

 

 

 

BRAKE*

 

 

 

 

Does not bind or interfere with travel.

X

 

X

 

Brake easy to disengage/engage.

X

 

 

X

 

 

 

 

 

UPHOLSTERY (PROCEDURES 5 AND 6)

 

 

 

 

Inspect for rips, tears.

X

 

 

X

 

 

 

 

 

REAR WHEELS (PROCEDURE 9)

 

 

 

 

No excessive side movement or binding when

 

 

 

 

raised and turned.

X

 

 

X

 

 

 

 

 

FRONT WHEELS (PROCEDURE 9)

 

 

 

 

Inspect wheel/fork assembly for proper tension

 

 

 

 

by spinning wheel, wheel should come to a

 

 

 

 

gradual stop.

X

X

 

 

Loosen/tighten locknut if wheel wobbles

 

 

 

 

noticeably or binds to a stop.

X

 

X

 

Wheel bearings are clean and free of moisture.

X

 

 

X

CAUTION: As with any vehicle, the

 

 

 

 

wheels and tires should be checked

 

 

 

 

periodically for cracks and wear and should

 

 

 

 

be replaced.

 

 

 

 

 

 

 

 

 

TILLER (PROCEDURE 8)

 

 

 

 

Ensure that tiller adjustment handle engages

 

 

 

 

and disengages properly and securely

 

 

 

 

(PROCEDURE 3).

X

X

 

 

Scooter stops completely when throttle is

 

 

 

 

released (Does not continue to roll as if

 

 

 

 

throttle is activated).

X

X

 

 

 

 

 

 

 

SEAT (PROCEDURE 5)

 

 

 

 

Inspect seat swivel for release and engagement.

X

 

X

 

Seat locks into the determined swivel positions.

X

X

 

 

 

 

 

 

 

*NOTE: This includes the hand brake on the PANTHER MX-4.

SAFETY INSPECTION/ MAINTENANCE

Part No. 1090132 Rev F

15

Invacare Scooters

Page 15
Image 15
Invacare PANTHER MX-4, PANTHER LX-4, LYNX LX-3PLUS Safety INSPECTION/MAINTENANCE, Safety INSPECTION/ Maintenance