6
SENSOR
EXT. SPEAKER
OUT
AC OUT AC IN
LAN
RS-232C
RS-485
DVI-D
(HDCP)
RGB IN
RGB OUT
VIDEO IN
AUDIO 1 IN
AUDIO 2 IN AUDIO 2 OUT
VIDEO OUT
AUDIO 1 OUT
MAKE/TRIG. (IN ONLY)
Attaching the power cord holder
The provided power cord holder prevents accidental disconnection of the
AC power cord from the AC IN terminal.
• The power cord holder consists of two parts, a case and a cover.
12
3
CAUTION
• Use only the provided screws.
• Make sure the plug will not be pulled out after the cover is attached to
the case.
To detach the cover
To bind the cables (example):
Connections
Select the most appropriate terminal referring to the illustration below and the tables on page 7 when
connecting equipment to the terminals A - J.
CAUTION
• Before making any connections, turn off all the equipment.
• DO NOT connect the power cord until all connections are completed.
• Refer also to the user manual of each piece of equipment.
• Do not short-circuit 9 and ( speaker cords to each other. (Refer also to the instructions supplied with the
speakers.)
External control equipment
For details, see page 20.
To wall outlet
A
B
C
D
G
E
F
I
An external unit can be installed here.
Consult your dealer for more information.
Cover
Power supply for an external unit
(Max. 2A). Consult your dealer
for more information.
H
J
Motion sensor (see page 18)
Push the tab to detach the
cramp.
Cord cramp (supplied)
Insert the end of the cramp
into the hole pointed with
3.
AC IN terminal
Case
GM-F520S_EN.indd 6GM-F520S_EN.indd 6 09.2.16 5:05:01 PM09.2.16 5:05:01 PM