JVC GZ-HM440, GZ-HM670 Recording Automatically by Sensing Movements Auto REC, Time-Lapse Setting

Recording

Time-Lapse Setting

The greater the number of seconds, the longer the recording interval.

Setting	Details
OFF	Deactivates the function.
1SEC INTERVAL	Takes a frame at 1-second intervals.
	Recorded videos will be played back at 30 times
	speed.
2SEC INTERVAL	Takes a frame at 2-second intervals.
	Recorded videos will be played back at 60 times
	speed.
5SEC INTERVAL	Takes a frame at 5-second intervals.
	Recorded videos will be played back at 150 times
	speed.
10SEC INTERVAL	Takes a frame at 10-second intervals.
	Recorded videos will be played back at 300 times
	speed.
20SEC INTERVAL	Takes a frame at 20-second intervals.
	Recorded videos will be played back at 600 times
	speed.
40SEC INTERVAL	Takes a frame at 40-second intervals.
	Recorded videos will be played back at 1 200 times
	speed.
80SEC INTERVAL	Takes a frame at 80-second intervals.
	Recorded videos will be played back at 2 400 times
	speed.

Caution :

0Audio cannot be recorded during time-lapse recording.

0Zooming, simultaneous still image recording, and image stabilizer are not available in time-lapse recording.

0When recording is stopped with the recorded time less than “0:00:00:17” , the video will not be saved.

0Seamless recording is disabled in time-lapse recording.

Memo :

0 Settingsoff. of time-lapse recording are not saved when the power is turned

0Recording stops automatically 99 hours after it is started.

0Make use of a tripod and AC adapter for time-lapse recordings with long intervals.

It is also recommended to fix the focus and white balance manually.

“Tripod Mounting” (A p. 22) “Adjusting Focus Manually” (A p. 31) “Setting White Balance” (A p. 32)

Recording Automatically by Sensing Movements (AUTO REC)

This function enables the unit to record automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor. (AUTO REC)

It can be set for both video and still image modes.

1Select video or still image mode.

0The video or still image mode icon appears.

2Compose the picture according to the subject. 0 Adjust the angle of view with the zoom, etc.

3Tap “MENU”.

4Tap “AUTO REC”.

0Tap ∧ or ∨ to move upward or downward for more selection.

0Tap L to exit the menu.

0Tap J to return to the previous screen.

5Tap “ON”.

6Recording starts automatically when the subject within the red frame moves.

0A red frame appears 2 seconds after the menu display disappears.

0For video recording, recording continues while there are still movements of the subject (changes in brightness) within the red frame. When there are no more movements of the subject (changes in brightness) within the red frame, recording will stop in 5 seconds.

44