JVC SA-DV6000 manual Proxy Settings, Wireless Connections, Multiple Client PC to a Single VTR

From Internet Explorer, click on the ‘Tools’ in the menu bar, and then click on ‘Internet Options’.

From the window that opens, click on the ‘Connections’ tab.

LAN connections Wireless LAN

\Wireless Connections, Multiple Client PC to a Single VTR

DHCP	OFF	DHCP	OFF
WLAN AD HOC MODE	OFF	WLAN AD HOC MODE	OFF
WLAN ESS ID	abcdef	WLAN ESS ID	abcdef
WLAN CH	2	WLAN CH	2
IP ADDRESS	192. 168. 100. 102	IP ADDRESS	192. 168. 100. 101
SUBNET MASK	255. 255. 255. 000	SUBNET MASK	255. 255. 255. 000

			STATION
			ESS ID abcdef
		Encryption Mode Open System
						BR-DV6000
					PROXY SERVER	NO USE
					DHCP SERVER	NO USE
					IP ADDRESS	192. 168. 100. 100
DHCP	OFF				SUBNET MASK	255. 255. 255. 000
WLAN AD HOC MODE	OFF
WLAN ESS ID	abcdef				PC wireless LAN driver settings
WLAN CH	2				NetworkType	Infrastructure
					ESS ID	abcdef
IP ADDRESS	192. 168. 100. 103				Channel	2
SUBNET MASK	255. 255. 255. 000				Encryption Mode	Open System
			DHCP	OFF	* For the PC settings when using a LAN card,
			WLAN AD HOC MODE	OFF
Network Type (Ad Hoc/Infrastructure)					refer to the instruction manual included with
			WLAN ESS ID	abcdef	the LAN card.
Make sure ESS ID and Channel settings
			WLAN CH	2
are the same.
Set a unique number to avoid doubling			IP ADDRESS	192. 168. 100. 104
			SUBNET MASK	255. 255. 255. 000
IP ADDRESS	192. 168. 100. XXX
SUBNET MASK	255. 255. 255. 000

Set the same domain

SA-DV6000 allows up to a maximum of 10 clients to be connected at the same time via a network for viewing streaming data. If the client is a media server or equivalent, more clients can view streaming data via the server. (The number of client connections allowed differs depending on the server.)

A total of 10 clients can connect simultaneously, clients can be using Streamproducer and Windows media player to view the VTR’s output.

Configure the VTR as follows:

●DHCP must be OFF.

●The WLAN AD HOC Mode must be OFF.

●The WLAN ESS ID, WLAN CH, and WEP encryption key must match the access point

●If clients will be connecting through an Intranet or the Internet, consult you IT department and request a IP address for the VTR.

●VTR and Client PC are set the same domain and different IP addresses.

LAN connections Proxy Settings

It is necessary to select whether to use a proxy server or not depending on the network environment.

To determine if you are using a proxy server.

1.

2.

3. From the ‘Connections’ window, click on the ‘LAN Settings’ button.

4. If ‘Use a proxy server’ is checked in the window that opens, then you use a proxy server to access the Internet.

●If this is not checked, then you don’t use a proxy server, and your configuration is complete.

5.Click on the ‘Advanced’ button.

6.In the ‘Exceptions’ box of the window that opens, enter the first portion of the VTR IP address followed by.‘*.*’ For ex- ample, the IP address of a VTR may be 192.168.100.101, so 192.168.*.* has been entered

7.Click ‘OK’ in all open windows.

26 27