JVC SA-DV6000 manual Basic

Basic Inserting/removing CF memory card/LAN card

Basic Using LAN terminal

SA-DV6000

●TheSA-DV6000 accepts the following cards for which operation has been confirmed: (As of June 2003)

Other than the use of a LAN card, this unit is also equipped with a LAN terminal for LAN connection.

EJECT button

CF memory card or LAN card

Surface

Card slot

Operating voltage		3.3 V / 5 V
Current consumption		Max. 250 mA
●Wired LAN-card
US:	EA2900-117 (Revision C) (Name of manufacturer: Socket
	Communications, Inc)*1

Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1

Asia: EA2906-194 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1

* Revision indicated on the upper right of package production label. ●Wireless LAN-card

TEW-201PC TEW-202CF

TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer: TRENDware)

WCF11 (Name of manufacturer: LINKSYS)*2 AIR-PCM350

(Name of manufacture: Cisco Systems)

FCCID: LDK102040

VIDEO	COMPONENT		REMOTE2
LINE
Y/C
IN	R-Y	B-Y	IN
	Y

OUT	AUDIO	LAN
	CH 1/3	CH 2/4

OUT					IN
					OUT
MONITOR		IN	OUT
OUT		SYNC IN	TIME CODE
		IN	OUT	OFF
			REC		PLAY
SIGNAL		DV	SERIAL	TIMER	MONITOR
	DC12V	IN/OUT			OUT	REMOTE1
GND			REMOTE

LAN terminal

Link LED

LAN cable

Caution

●CF (Compact Flash) card

SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1

*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter

*2: Use PCMCIA card TYPE 2 adapter

For the latest operational check card, visit the website

below or contact your JVC dealer.

http://www.jvc-victor.co.jp/english/pro/prodv/

LAN cable types

●When connecting directly to a PC, use a 10/100 BASE-T cross cable.

●When connecting to a network hub, use a 10/100 BASE-T straight cable.

Connecting to the LAN terminal

Completely insert the connector of the LAN cable.

Caution

●Make sure the power of BR-DV6000 is off when inserting/ removing a CF memory card/LAN card. Inserting/removing a card with the unit power on may damage the data storage section of the CF memory card or the card itself.

●Do not remove the power cable with the power of the BR- DV6000 on. Recorded section on the CF Memory Card or the CF Memory Card itself may be damaged as a result.

●Do not use the wireless LAN card continuously for more than 48 hours.

Inserting card

1. Turn off the BR-DV6000 power.

2. Insert a card into the SA-DV6000 card slot.

3. Turn on the BR-DV6000 power.

LCD screen

●Do not remove the LAN cable when the Link LED is on. For a short time, menus cannot be opened.

●Do not connect/disconnect the LAN cable when recording to a CF memory card.

●Do not mount a LAN card when the Link LED is on.

Link LED

The Link LED will light when connected to a network using the LAN terminal.

When mounted with a LAN card, the Link LED will not light.

When using both LAN card and LAN terminal

When mounted with a LAN card, the LAN card will be given priority for LAN connection. In this case, communication via the LAN terminal is not possible.

Memo

When mounted with a CF memory card, the following can be performed:

●Transferring of a clip recorded on a CF memory card to a server via the LAN terminal.

CH1							OVER
48k L	40 30 20		10			0 dB
CH2							OVER
FREENDF TC 12H 34M 34S10F
PLAY		SP222min
			W						e
	01/02/03		Y/C	SYNC
								CF
	AM 01:23:45		INS		VA				‰

Card status display

		: Flashes during
		initialization
	e	: LAN card or built-
		in LAN enabled
C F		: CF memory card

●Card status according to the inserted card type is displayed on the LCD screen. (☞ page 6)

●The card status is displayed when setting the LCD screen to the Enlarged display mode.

Memo

When turning the power on, the card status display shown on left will flash during initial- ization.

Removing card

1. Turn off the BR-DV6000 power.

2. Press the EJECT button of SA-DV6000 and remove the card.

4 5