Network remote control Transferring clips on a CF memory card to a server
By connecting the LAN terminal of the
Caution
Before using this function, it is necessary to set the destination, etc. of the clip using the FTP CLIENT SETUP screen. (☞ page 50)
FTP SEND SETUP screen
Others | TOP PAGE can be customized |
TOP PAGE can be customized as desired.
TOP PAGE created on a PC is uploaded by FTP.
NETWORK SETUP screen
1. Set the unit so that NETWORK SETUP can be displayed. (☞ page 47)
2. Create HTML on the PC using a commercially available HTML editor, etc.
Save the created HTML file under the name of “index.html”.
Screen selection
FTP button: Starts transfer.
Clip selection:
Select the checkboxes of the clips to transfer
CANCEL button:
Cancels transfer.
3. Use a commercially available FTP program on the PC to upload index.html created in step 2 above to
FTP program settings (Execute using the set value.)
IP Adress | : | 192.168.100.101 |
Remort Port | : | 21 |
USER ID | : | |
PASSWORD | : |
\It is also possible to upload link pages from index.html, images, etc.
Caution
Preparations
●Insert a
●Connect the LAN terminal of the network pack to a network.
●In the FTP CLIENT SETUP screen of the Streamcorder, set the transfer destination of the clips.
Operating the FTP SEND SETUP screen
1. Click FTP SEND SETUP on the left side of the Stramcorder screen to display the FTP SEND SETUP screen as shown above.
2. Select the clips to transfer.
Select the checkboxes of the file numbers to transfer. (Multiple selections allowed)
3. Click the FTP button to transfer the selected clips to the server.
\To cancel transfer, click the CANCEL button.
●Make sure the uploaded files do not exceed 100KB in total.
●The HTML display will fit properly on the screen when creating at a size of about 500 ⋅ 360 pixels.
●Once uploaded, the file is overwritten and cannot be reproduced. Download and backup necessary files in the FTP.
60 | 61 |
