Kathrein MSK 125 manual Analogue Satellite Reception, SAT ANALOGUE/DVB-S2 Switch

SAT

ANALOGUE SATELLITE RECEPTION

In SAT mode the MSK 125 can be adjusted to “Analogue” and “DVB S(2)” reception types.

SAT ANALOGUE/DVB-S(2) SWITCH

Press once	= SAT analogue
Press again	= DVB-S(2)
Press again	= SAT analogue again
FREQUENCY DISPLAY AND ENTRY

To measure the level of a reception signal, you must first enter the desired frequency. The LC display indicates the frequency and the measured level. The frequency can be entered from 920 MHz to 2150 MHz in 100 kHz intervals.

COMMAND OVERVIEW OF SAT FREQUENCY ENTRY

Switch to satellite reception (analogue or digital)

Example

Note

... Enter frequency

Frequency can be changed in 100 kHz intervals

Confirm entry

LC display:

•Frequency: 1288.0 MHz

•Operating mode: SAT

•Level: 66.5 dBµV A (A = analogue)

To enter the frequency 1508 MHz:

Press

LC display:

•Frequency: 1508.0 MHz

•Operating mode: SAT

•Level: 86.5 dBµV (A = analogue)

A “+” or “-” on the display means that the MSK 125 has not been

adjusted precisely to the desired carrier. Use the and

buttons to refine the frequency for optimum reception. A vertical line on the display indicates optimum frequency adjustment.

Complete your frequency entry by pressing the button.

The most recent frequency setting remains even after you switch the MSK 125 off if it has been entered with digits and confirmed

by pressing .

18