Kathrein MSK 125 manual Cable Analogue Level Measurement, Command Overview for TV Frequency Entry

TV MEASUREMENT

COMMAND OVERVIEW FOR TV FREQUENCY ENTRY

	Switch to desired TV reception
or
	Channel/frequency switch
...	Enter frequency
	Confirm entry
and	Change frequency in intervals

Example

To enter the frequency 175.25 MHz:

Press	(calling up the frequency menu)
Then
(frequency entry)

LC display:

•Frequency: 175.25 MHz

•Level: 65.0 dBµV

•Operating mode: Analogue cable TV

Note

After calling up the frequency menu for the first time you have to enter the digit order for another frequency entry.

The most recent frequency setting remains even after you switch the MSK 125 off if it has been entered with digits and confirmed by

pressing .

Please note that the points before and after the channel number refer to the precisely set channel:

CH: .10. or CH: S.04.

If you enter the frequency outside the valid channel raster, the channel is displayed without points:

CH: 10 or CH: S 04

“CABLE ANALOGUE” LEVEL MEASUREMENT

After you have set a channel or frequency the level is measured automatically and indicated on the LC display in dBµV or dBmV (depending on the device configuration). The input level can be measured in the range of 30 dBµV to 120 dBµV (-30 dBmV to 60 dBmV).

LC display:

•Channel: CH 05

•Operating mode: Analogue cable TV

•Measured level: 86.5 dBµV

37