SAT
Example
Switching on the 22 kHz signal
Press the 
button
LC display:
•LNB voltage: 14 V
•Current consumption: 150 mA
•22 kHz signal switched on
Note
Press the 
button again to switch off the 22 kHz signal.
Press 
to exit the LNB menu.
DIGITAL SAT RECEPTION
In SAT mode the MSK 125 can be adjusted to “Analogue” and “DVB S(2)” reception types.
FREQUENCY DISPLAY AND ENTRY
To measure the level of a reception signal, you must first enter the desired frequency. The LC display indicates the frequency and the measured level. The frequency can be entered from 920 MHz to 2150 MHz in 100 kHz intervals.
COMMAND OVERVIEW OF SAT FREQUENCY ENTRY
Switch to satellite reception (analogue or digital)
...
Enter frequency
Frequency can be changed in 100 kHz intervals
Confirm entry
LC display:
•Frequency: 1236.0 MHz
•Operating mode: SAT
•Level: 86.5 dBµV D (D = digital)
Example
To enter the frequency 1236 MHz:
Press 
22
