SAT
COMMAND OVERVIEW FOR FRAMING BYTE
HEX | Description |
Byte |
|
E0 | Master command, |
E1 | Master command, recurring transmission |
E2 | Master command, expecting response, first transmission |
E3 | Master command, expecting response, recurring transmission |
E4 | Response from Slave, “OK”, no errors detected |
E5 | Response from slave, command not supported by slave |
E6 | Response from Slave, parity error detected |
E7 | Response from slave, command not recognised |
COMMAND OVERVIEW FOR ADDRESS BYTE
Hex Byte | Description | |
00 | All devices | |
10 | Every LNB, matrix or SMATV | |
11 | LNB | |
12 | LNB with | |
14 | Matrix (switcher) | |
15 | Matrix (switcher) with | |
18 | SMATV | |
20 | Every polarizer | |
21 | Maximum turn (full skew) in linear polarisation | |
22 | Stepwise polarizer adjustment | |
30 | Every positioner | |
31 | Polar/Azimuth positioner | |
32 | Elevation positioner | |
33 | Combined positioner | |
34 | LNB positioner | |
40 | Installation help | |
41 | Signal strength adjustment help | |
60 | Reserved for assigned addresses | |
70 | “Intelligent slave interface” for “Proprietary | |
bus” | ||
| ||
71 | Interface for participants and controlled head end | |
Fx | OEM expansion |
28
