BMPORTANT SAFETY INSTRUCTIONS
CAU ON
Your sewing machine iS designed and constructed only for HOUSEHOLD use.
Before using this sewing machine, read this manual and follow all Safety Rules and Operating Instructions_
DAN G E
1 .. This sewing machine should never be left unattended when plugged in.,Always unplug this sewing machine from the electric outlet immediately after using and before cleaning
2, Always unplug before replacing a sewing machine bulb,. Replace bulb with same type rated 15 VVatts_ 3o Do not reach for a sewing machine that has fallen into water, Unplug immediately
4..Do not place or store this sewing machine where it can fall or be pulled into a tub or sink. Do not place or drop it into water or other liquid°
t .. Do not allow this sewing machine to be used as a toy Close attention is necessary when this sewing machine is used by or near children.
2.Use this sewing machine only for its intended use as described in this owner's manual..
Use only attachments recommended by the manufacturer as contained in this owner's manual,
3, Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water,
Return this sewing machine to the nearest Sears store or service center for examination, repair, electrical or mechanical adjustmenL
4..Never operate this sewing machine with any air opening blocked Keep ventilation openings of this sewing machine and foot controller free from accumulation of lint, dust and loose cloth.
5, Never drop or insert any object into any opening.. 6o Do not use outdoors.
7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered°
8.To disconnect, turn all controls to the off (" 0") position, then remove plug from outlet..
9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
!0 Keep fingers away from all moving parts. Special care is required around the sewing machine needle. 1!. Always use the proper needle plate_ The wrong plate can cause the needle to break.
12. Do not use bent needles_
13_ Do not pull or push fabric while stitching. It may deflect the needle causing it to break
14..Switch this sewing machine off ("0") when making any adjustment in the needle area, such as threading the needle, changing the needle, threading the bobbin or changing the presser foot, and the like.
15 Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when making any other adjustments mentioned in this owner's manual.
SAVE THESE iNSTRUCTiONS
Beforeand runusingthe machineyour sewingwithoutmachinethreadforforthea fewfirstminutes,time, placeWipea wasteaway anyfabricoilunderwhich themaypresserappear.foot
