Kenmore 385.151082 owner manual Bar Tacking, Button

Bar Tacking

(_) Stitch		selector:	3
(_	Stitch	length:	0.5 to	'I
(_) Needle thread tension:			1 to 4
®	Presser foot:		Zigzag	foot

This is similar to a very short satin stitch, and is used to reinforce points of strain, such as corners, pockets and straps of lingerie

Sew four (4) to six (6) stitches.

0 Bartacking

Button		Sewing
(i)	Stitch	selector:	2 to 3
(_	Stitch	length:	Any

(_ Needle thread tension:	1 to 4
@ Presser foot:	Zigzag foot
(_) Feed dogs:	Dropped

%. ................

1Drop the feed dogs. Place the button below the zigzag foot, making sure to align the holes with the horizontal slot in the foot Lower the presser foot to hold the button in place

2.There are a number of zigzag width settings between "2" and "3". Determine which zigzag width setting matches the distance between the button holes° The needle must go safely through each hole when sewing.

Unthread the needle to help you determine the zigzag width.

3.Thread the needle. Turn the handwheet, so that the needle is in its leftmost position, and then drop the

needle through the left buttonhole.

4_ Press the foot control and sew about t0 stitches.

5.Sew the other row of holes (if applicable) using the step above. Trim excess threads from both sides of the fabric.

©®

PATTERNLENGTH

®

..... ,J

t

J

0®

PATTERN LENGTH [_

®

44