Kenmore 385.151082 owner manual Bobbin winding

Bobbin winding (continued)

[] Push the bobbin to the right,.

[_With the free end of the thread held in your hand, depress the foot cohtrol. Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin..

	f
[] Depress the foot control again_ When the bobbin is fully	[]
wound, it stops automatically. Return the bobbin winder
to its original position by moving the spindle to the left,
and cut the thread..

.... J

_] Push the handwheel to the left to engage the clutch.	%
* The machine does not function until the clutch is
engaged°

NOTE:

The position of the bobbin winder stopper is adjustable depending on required amount of thread on bobbin (Leo!/2 full or full)o Use a screwdriver and loosen the screw one turn or less to adjust the position of the bobbin winder stopper.

Do not take .the screw all the way out.

J

20