Kenmore 385.151082 owner manual Section VL Buttonhole

SECTION VL BUTTONHOLE

Buttonhole

(_) Stitch	selector:	_[_ _=_[_
(_) Stitch	length:	Blue zone
(_) Needle thread tension:		1 to 5
(_ Presser foot:		Sliding buttonhole foot

Depending on your preference, you may adjust the stitch density within the bfue zone on the stitch length control°

•For a higher density, turn the stitch length control toward "0". (_) Tight stitches for lightweight fabrics.

°For a lower density, turn the stitch length control toward "1" (_) Loose stitches for heavyweight fabrics.

f NOTE:Alwaysmake surecheckthe aadjustmentbuttonhole satisfieson scrapyouof. fabric to T

°Starting to sew

Snap the buttonhole foot (J) on the presser foot holder. Carefully mark the buttonhole length on the fabric,.

Place the fabric under the foot, with the buttonhole marking running toward you..

Move the slider (A) toward you, so that the red arrow (C) on the

f

slider aligns with the start mark (B). Lower the presser foot_

NOTE:The markings on the slider are engraved in centimeters.

Set the stitch selector at	_Sew forward	until you reach the	_
front mark of your buttonhole° Stop sewing		at a left stitch°	_"

%......

O ®

PATTERN [_ LENGTH

®

%

® ®

LENGTH__

J

J

B

A/

, ..... J

54