Kenmore 385.151082 owner manual OInserting bobbin

oInserting bobbin

[_ Place a bobbin in the bobbin case, making sure the thread feeds clockwise from the bobbin..

[]

[] Draw the thread through the slot of the case.

.J

[]Continue to draw the thread under the tension spring 0 and through the opening°

Pull out about 4" (10 cm) of thread° (_ Tension spring

[

[] Holding the latch open, position the bobbin case into the shuttle, and then release the latch.

%

J

[_The case should lock into the place when the latch is released°

[]

22