Overedging
Overedging with a serger is the simplest and quickest way
to finish the raw edges of fabric.
Useful for the open seams of jackets, pants, etc. It is often
sewn on one layer offabric.
3 threads
(_ Wrong side offabric
Needle thread
Lower looper thread
Right side of fabric
(_ Upper looper thread
/Machine setting
Number or threads 3
Number of needles 1
(Remove the needle oneither side)
Differential feed ratio 1.0
Stitch length 3
Needle thread tension (Gold orBlue) 3to 6
Upper looper thread tension (Red) 3to 6
Lower looper thread tension (Green) 3to 6
Lower looper pre-tension setting slider STD
Needle plate setting knob S
3 threads
3 hilos
3 ills
®
Method
(_ Wrong side
Seam allowance
With right sides of fabric together, sew a 5/8" (1.6 cm) seam
on a conventional sewing machine; reverse stitching atthe
beginning and end of the seam.
Serge seam allowances separately, guiding the seam
along the left edge of the serging foot. The serger will
trim 1/8"(0.3 cm).
Press seam open.
Overedging seams before sewing a garment together
prevents unravelling and makes sewing even more
enjoyable.
No need to worry about finishing touches; everything is
done even before a garment iscomplete.
Just be sure that the knives only skim theedge of fabric,
without cutting off part of the seam allowance.
For an unlined jacket, finish the edges first as illustrated.
68