!0[MON]
Press [MON] to turn the Monitor function ON and OFF {page 62}.
Press [F], [MON] to enter Squelch Level Adjustment mode {page 11}.
!1Numeric Keypad
[1]Press [F], [1] to select the Signaling (Tone, CTCSS and DCS) function {pages 20, 43, 46}.
[2]Press [F], [2] to enter the Tone frequency setup mode {page 21}.
Press [F], [2] (1s) to start Tone frequency ID scan {page 22}.
[3]Press [F], [3] to change the Frequency step size {page 58}.
[4]Press [F], [4] to enter the DCS code setup mode {page 46}. Press [F], [4] (1s) to start DCS code ID scan {page 47}.
[5]Press [F], [5] to enter the CTCSS frequency setup mode {page 44}.
Press [F], [5](1s) to start CTCSS frequency ID scan {page 44}.
Press [5](1s) to turn the Speaker Attenuation function ON and OFF {page 67}.
[6]Press [F], [6] to turn the Priority Scan ON or OFF {page 41}.
[7]Press [F], [7] to turn the Reverse function ON or OFF {page 24}. Press [7] (1s) to turn the ASC function ON or OFF {page 24}.
[8]Press [F], [8] to select an Offset direction {page 19}.
[9]Press [F], [9] to turn Memory Channel Lockout ON or OFF {page 42}.
[0]Press [0] (1.5s) to turn the Emergency siren ON or OFF {page 65}.
[ |
| ] Press [ |
|
|
| ] to illuminate the display {page 58}. |
|
|
|
| |||
|
| Press [ |
| ] (1s) to keep the light ON continuously. {page 58}. | ||
|
|
| ||||
[#]Press [#] to enter the Direct frequency entry mode {page 13}.
Press [F], [#] to enter the Volume Adjustment Operation Selection mode {page 10}.