Kenwood TH-255A DTMF TX Hold, ■Storing a DTMF Code in Memory

DTMF TX Hold

This function causes the transceiver to remain in Transmission Mode for 2 seconds after you release each key. So, you can release [PTT] while sending the DTMF tones.

1Enter Menu mode and access Menu No. 21 (DT.H).

2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select “ON”.

3Press [MENU] to store the setting.

4Press any key other than [MON], [UP]/ [DOWN] or [] to exit Menu mode.

Automatic Dialer

If you use the 10 dedicated memory channels to store DTMF codes, you do not need to remember a long string of digits.

■Storing a DTMF Code in Memory

1Enter Menu mode and access Menu No. 19 (DTMF.MR).

2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select your desired DTMF memory channel number from 0 to 9.

3Press [MENU].

•The DTMF code entry display appears and the last digit blinks.

4Rotate the Selector (or press [UP]/ [DOWN]) to select a DTMF code.