MEMORY CHANNELS
In memory channels, you can store frequencies and related data that you frequently use so that you do not need to reprogram that data every time. You can quickly recall a programmed channel through simple operation. A total of 100 memory channels (50 when using the Memory Name function) are available for storing
frequencies, modes and other operating conditions.
Number of Memory Channels
The transceiver must be configured to either 100 memory channels without using the Memory Name function or 50 memory channels with the Memory Name function (default).
To change the memory channel capacity:
1Enter Menu mode and access Menu No. 4 (M.CH).
2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select “50” or “100”.
3Press [MENU].
• “SURE ? ” appears.
4Press [MENU] to accept.
5 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit Menu mode.
Note:
◆If you change the memory channel capacity from 100 channels to 50 channels after having stored data in channels 50 to 99, all memory channel data in channels 50 to 99 will be erased.
26