Kenwood TH-255A ■Programming a Priority Channel, ■Using Priority Scan

■Programming a Priority Channel

1Press [VFO], then rotate the Selector (or press [UP]/ [DOWN]) to select your desired Priority Channel frequency.

2Select selective call functions, if necessary.

3Press [F], [MR].

•The memory channel number appears and blinks.

4Rotate the Selector (or press [UP]/ [DOWN]) to select “Pr”.

5Press [MR] to store the data on the Priority Channel.

■Using Priority Scan

1Press [F], [6] to turn the Priority Scan ON or OFF.

•The “” icon appears when the Priority Scan is ON.

Note:

◆If a signal is received on a Priority Channel with a CTCSS or DCS code programmed, the Priority Channel is recalled only when the programmed tone/ code matches.

◆Press and hold [MON] to pause Priority Scan when the transceiver is not displaying the Priority Channel. Release [MON] to resume Priority Scan.

◆If you clear the Priority Channel, Priority Scan stops.

◆ You can also press any key other than [ ], [MON], [F] then [MON] (Squelch level adjustment), [F] then [MENU] (Key lock) and [PTT] to exit Priority Scan while “PRI” is blinking.

41