Note:

◆Record the date of purchase, serial number and dealer from whom this product was purchased.

◆For your own information, retain a written record of any maintenance performed on this product.

◆When claiming warranty service, please include a photocopy of the bill of sale or other proof-of-purchase showing the date of sale.

Cleaning

To clean the case of this product, use a neutral detergent (no strong chemicals) and a damp cloth.

Microprocessor Reset

If your transceiver seems to be malfunctioning, resetting the microprocessor may solve the problem. The following 2 reset Modes are available. When performing the reset, you may lose memory data and stored information. Write down important data before performing the reset.

VFO Reset

This resets the transceiver parameters excluding the stored DTMF Numbers in Memory {page 50} and memory channel contents.

Full Reset

This resets all transceiver parameters to the factory default values.

Note: While operating the transceiver in Channel Display Mode {page 35}, you cannot reset the transceiver.

■VFO Reset

When the transceiver is turned OFF:

1Press [VFO] + Power ON.

•The VFO reset confirmation message, “VF.RST?” appears.

71