•The separate transmission frequency is stored in the Call Channel.

Note:

◆When you recall an odd-split Call Channel, “ ” and “ ” appear on the display.

◆Transmit offset status and Reverse status are not stored in an odd- split Call Channel.

Channel Display Mode

While in this mode, the transceiver displays only memory channel numbers (or Memory names if they have been stored) instead of frequencies.

Press [PTT] + [MR] + Power ON.

•The transceiver displays the memory channel number in place of the operating frequencies.

To recover normal operation, turn the transceiver OFF and press [PTT] + [MR] + Power ON again.

•The following transceiver keys cannot be used while in Channel Display mode:

•[MENU]/ [VFO]

•[F] then [VFO] (Memory to VFO transfer)

•[F] then [MR] (Storing Memory channel)

•[VFO] (1s) (Band scan) / [7] (1s) (ASC)

•[PTT] + [F] + Power ON (Full reset)

•[VFO] + Power ON (VFO reset)

•[MR] + Power ON (Clearing Memory channel)

Note:

◆To enter the Channel Display Mode, you must have at least one memory channel that contains the data.

◆If the memory channel contains the Memory name data, the Memory name is displayed in place of the “CH” characters.

35