Note:
◆Call Channel data cannot be cleared.
◆You can also clear the Priority Channel, and L0/U0 ~ L2/U2 channels.
◆While the transceiver is in Channel Display Mode or Lock function is activated, you cannot clear the channel data.
Naming a Memory Channel
You can name memory channels using up to 6 alphanumeric characters. When you recall a named memory channel, its name appears on the display in place of the stored frequency. Names can be call signs, repeater names, cities, names of people, etc. In order to use the Memory Name function, the memory channel capacity must be set to 50 channels. To change the memory channel capacity from 100 to 50, access Menu No. 4 (M.CH).
1Press [MR], then rotate the Selector (or press [UP]/ [DOWN]) to select your desired memory channel.
2Enter Menu mode and access Menu No. 5 (M.NAME).
3Press [MENU].
•A blinking cursor appears.
4Rotate the Selector (or press [UP]/ [DOWN]) to select a desired alphanumeric character.
•You can enter the following alphanumeric characters:
0 ~ 9, A ~
•Press [CALL] to delete the character at the current cursor position.
5Press [MENU].
•The cursor moves to the next digit.
6Repeat steps 4 and 5 to enter up to 6 digits.
•To complete the entry, press [MENU] without selecting a character.
32