Kenwood TH-255A ■Using the Selector (or [UP]/ [DOWN] keys), ■Using a Numeric Keypad

To also store a transmit frequency, proceed to step 6; otherwise proceed to step 10.

6 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to select the desired transmit frequency.

•The frequency selected in step 3 will be used as a receive frequency.

7 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to select the memory channel that you selected in step 4.

8Press [F].

9Press [PTT] + [MR].

•The selected transmit frequency is stored in the memory channel, and the memory channel number is incremented.

10Repeat steps 3 to 5 (simplex) or 3 to 9 (split) to sequentially store in memory channels.

•Turn the transceiver power OFF, then ON to exit Continuous Memory Storage mode.

Note:

◆If you use Direct Frequency Entry {page 13} to select a frequency in step 2, you need not press [].

◆You cannot start Storage mode when in Channel Display mode.

◆You cannot start Menu mode when in Memory Storage mode.

Recalling a Memory Channel

1Press [MR] to enter Memory Recall Mode. The memory channel last used is recalled.

2Rotate the Selector (or press [UP]/ [DOWN]) to select your desired memory channel.

•You cannot recall an empty memory channel.

•To restore VFO Mode, press [VFO].

You can also recall a memory channel by entering a desired memory channel number with the keypad.