3Press [MENU] to store the setting.
4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit Menu mode.
Frequency Step Size
Choosing the correct frequency step size is essential in order to select your exact receive frequency using the Selector (or [UP]/ DOWN). You can select your desired frequency step size from: 5, 6.25, 10, 12.5, 15, 20, 25, 30, 50, or 100 (kHz).
To change the frequency step size:
1Press [VFO], then press [F], [3].
• The current frequency step size appears.
2Rotate the Selector (or press [UP]/ [DOWN]) to select your desired frequency step size.
3 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit the frequency step size selection.
Note: If you change to a frequency step size that does not match the current operating frequency, the transceiver automatically adjusts the frequency to match the new frequency step size.
Back Light
To illuminate the display:
Press [].
•If no other key is pressed, the light turns OFF approximately 5 seconds after releasing [].
• | Press any key (including [PTT]) other than [ |
| ] while the display | ||
| |||||
| is lit to restart the | ||||
• | Press [ |
| ] while the display is lit to immediately turn the light | ||
| |||||
| OFF. |
To keep the light ON continuously:
58