Monitor
When you are receiving while the squelch function is ON, weak signals may become intermittent. If the CTCSS or DCS function is ON, you may want to disable the squelch function temporarily to monitor the current channel activities. In both of these cases, use the Monitor function to temporarily disable the squelch function.
To activate the Monitor function:
1Press and hold [MON].
• The speaker is unmuted and you can monitor the signals.
2Release [MON] to return to normal operation.
Power On Message
You can change the Power ON Message (a maximum of 6 characters) when the transceiver is turned ON.
1Enter Menu mode and access Menu No. 15 (P.ON.MSG).
2Press [MENU].
•A blinking cursor appears.
3Rotate the Selector (or press [UP]/ [DOWN]) to select a character.
•You can enter the following alphanumeric characters: 0 ~ 9, A ~ Z, - (hyphen), / (slash) and a space.
4Press [MENU].
•The cursor moves to the next digit.
5Repeat steps 3 and 4 to enter up to 6 digits.
62