4Press [PTT] + [MR].
• The transmission frequency is stored in the memory channel.
Note: When you recall an
[7](Reverse function).
Continuously Storing in Simplex or Split Channels
Using the following procedure will be easier to sequentially store frequencies and related data in more than one simplex or split memory channel.
1Press [PTT] + [MON] + Power ON to enter Memory Storage mode.
2 Press [ ], then rotate the Selector (or press [UP]/ [DOWN]) to select the desired frequency and select related data as required (Tone, CTCSS, DTSS, etc.).
• Pressing [ ] toggles frequency select (the MHz dot blinks) or channel select (the channel number blinks).
3 Press [ ] again, then rotate the Selector (or press [UP]/ [DOWN]) to select the desired memory channel.
4Press [MR].
•The selected frequency and related data are stored in the memory channel, and the memory channel number is incremented.
5Turn the transceiver power OFF, then ON to exit Memory Storage mode.
29