•After storing a Memory name, the Memory name appears in place of the operating frequency. However, you can still display the operating frequency, if desired. To display the frequency rather than Memory name, access Menu No. 6 (MDF) and select “FRQ”. This menu toggles the display mode between the Memory name (“MN”) and frequency display (“FRQ”).
7 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit Menu mode.
Note:
◆You cannot name the Call Channel {page 34}.
◆You cannot assign a Memory name to a channel that does not contain data.
◆You can overwrite stored names by repeating steps 2 to 6.
◆The stored name is erased when you clear the Memory channel data.
Memory
Transferring the contents of a Memory channel or the Call channel to the VFO can be useful if you want to search for other stations or a clear frequency, near the selected Memory channel or Call channel frequency.
1Press [MR] or [CALL] to enter Memory Recall mode or select the Call channel.
2Rotate the Selector (or press [UP]/ [DOWN]) to select your desired channel. (This step is not necessary when selecting the Call channel.)
3Press [F], [VFO].
•The entire contents of the Memory channel or Call channel are copied to the VFO, and VFO mode is selected after the transfer is complete.
33