Kenwood TH-255A ■Using the Emergency Siren

■Using the Emergency Siren

1Press [0] (1.5s), to turn the Emergency siren ON.

•“EMG” appears.

2Press [0] (1.5s), [PTT] or power OFF, to turn the Emergency siren OFF.

•When the Emergency siren sounds, press [PTT] to turn it OFF.

•While the Emergency siren is sounding and a signal is being received (as shown by the signal meter), you will be unable to hear the signal from the speaker.

•The Emergency siren will continue to sound until it has been turned OFF.

When using an earphone or headset, do not turn the Emergency Siren function ON.

Minimum/ Maximum Volume

The transceiver retains the same volume level when the Volume control is turned to the lowest limit. Maximum Volume level allows you to limit the volume level to be no higher than the configured level even if a user attempts to increase the volume level.

1Enter Menu mode and access Menu No. 9 (VOLUME).

2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select the minimum volume level (0 - 31).

66