Automatic Repeater Offset (K type only)

This function automatically selects an offset direction, according to the frequency on the 2 m band. The transceiver is programmed for offset directions as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association.

1Enter Menu mode and access Menu No. 25 (ARO).

2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select “ON”.

3Press [MENU] to store the setting.

•You will be transmitting on an offset frequency value determined from your offset setting value {page 20} and an offset direction depending on your selected frequency. Refer to the settings below for offset directions:

4Press any key other than [MON], [UP]/ [DOWN] or [] to exit Menu mode.

Under 145.100 MHz: No offset (Simplex operation)

145.100 ~ 145.499 MHz: Minus (–) offset

145.500 ~ 145.999 MHz: No offset (Simplex operation)

146.000 ~ 146.399 MHz: Plus (+) offset

146.400 ~ 146.599 MHz: No offset (Simplex operation)

146.600 ~ 146.999 MHz: Minus (–) offset

147.000 ~ 147.399 MHz: Plus (+) offset

147.400 ~ 147.599 MHz: No offset (Simplex operation)

147.600 ~ 147.999 MHz: Minus (–) offset

148.000 MHz and higher: No offset (Simplex operation)

23