■Selecting an Offset Frequency

To access a repeater which requires an odd-split frequency pair, change the offset frequency from the default which is used by most repeaters.

1Enter Menu mode and access Menu No. 2 (OFFSET).

2Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select the appropriate offset frequency value.

•The selectable range is from 0.000 MHz to 29.950 MHz, in steps of 50 kHz.

3Press [MENU] to store the setting.

4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit Menu mode.

Note: After changing the offset frequency, the new offset frequency will also be used by Automatic Repeater Offset (K type only).

Activating the Tone Function

Press [F], [1] to turn the Tone function ON.

•Continually press [F], [1] to toggle the functions as follows: Tone ON >> CTCSS ON >> DCS ON >> OFF.

•The “” icon appears when the Tone function is ON.

20