1Press [MR] to enter Memory Recall Mode.

2Press [#], then enter the channel number using 2 digits.

•For example, to recall channel 49, press [#], [4], [9].

•You can also enter a memory channel number that is less than 10 by pressing [#] after entering the channel number. For example, to recall memory channel 9, press [#], [9], [#]. You can also press [#], [0], [9].

Note:

◆You cannot recall an empty memory channel. An error beep sounds.

◆You cannot recall the Program Scan memory channels (L0/U0 ~ L2/U2), Priority Channel (Pr) using the numeric keypad.

◆When you recall an odd-split memory channel, “ ” and “ ” appear on the display. Press [F], [7] (Reverse function) {page 24} to display the transmission frequency.

◆After recalling a memory channel, you may modify data such as Tone or CTCSS. However, these settings are cleared once you select another channel or the VFO Mode. To permanently store the data, overwrite the channel contents {page 28}.

Clearing a Memory Channel

To clear the data from an individual memory channel:

1Recall the memory channel you want to clear.

2Press and hold [] (POWER) to switch the transceiver OFF.

3Press [MR] + Power ON.

•A confirmation message appears.

4Press [MR] to clear the channel data.

•The contents of the memory channel are cleared.

•To exit clearing the memory channel, press any key other than [] or [MR].

31