ASSEMBLING THE JUICER
Assembling the Juicer_ par_ts
Befor_e Fir_st Use
Before using your Juicer for the first time, wipe Juicer parts with a warm damp cloth, then wipe clean with a damp cloth. To avoid damaging the juicer, do not wash or immerse the drive assembly in water or other liquids. Dry with a soft cloth. See “Care and Cleaning” section.
English
Gasket |
Pulp |
chute |
1 | Slide pulp chute out and insert gasket |
behind chute as shown. |
2 Place the bowl into the drive assembly.
3 | Put the screen wiper basket into |
the bowl. |
Alignment
mar_ks
4 | Place the screen of your choice into the |
screen wiper basket, matching up the |
red alignment marks on the screen and bowl as shown.
5 | Place the auger/blade assembly inside |
the screen. |
6 | Place the lid on the juicer, aligning the |
unlocked icon on the lid with the red |
arrow on the juicing bowl. Rotate lid clockwise until lid locks into place.
7
