Performing a Patch test Use the Patch test to verify that the Patch Readers are operational and that your patches are being read.
1. Touch Patch Test. The Patch Test screen will be displayed.
2.Place a document(s) with a patch(es) in the input elevator.
3.Touch OK. When the document(s) has been scanned, the results of the patch test will be displayed on the touchscreen.
The results show the number of patches and patch types that were recognized by the scanner.
Image Addressing - enabled | Image Addressing - disabled |
4. Touch End Job to return to the Idle screen.
Performing a self test | The scanner self test will test the image capture subsystem to ensure |
| that is functioning correctly. |
|
