Adjusting the output tray for document lengths up to 43.2 cm (17 in.)
Positioning the output tray
Adjusting for document length involves selecting an output tray position and angle, positioning the end stop, or removing the end stop and installing a document extender. Reviewing the following table will help you determine the best position for your output tray and your stacking needs.
Position | Stacking capacity | Maximum document |
|
| length with end stop |
|
|
|
1 | Up to 250 documents | 35.6 cm (14 in.) |
|
|
|
2 | Up to 500 documents | 35.6 cm (14 in.) |
|
|
|
3 | Up to 500 documents | 43.2 cm (17 in.) |
|
|
|
There are three positions that the output tray can be placed in.
1
2
3
1. Lift the front of the output tray and pull it out of position.
2.Set the back of the tray either in the upper position (1), lower position (2) or forward position (3) as desired.
|
