Kodak A-61555 manual Replacement procedures

Replacement procedures

Replacing the feed module or feed module tires

This section provides procedures for replacing the following parts. Use the list below as a guideline for frequency of replacement.

•Feed module tires and separation roller tires — tire life will vary depending upon paper types, environment and cleanliness. Nominal tire life is approximately 600,000 documents; results will vary. Degradation of feeder performance, multiple feeds, stoppages, etc. indicate a need to change tires. Change all the tires on the feed module and separation roller at the same time.

•Feed module and separation roller — it is recommended that you install a new feed module and separation roller approximately every 4th tire change. Install a new feed module and separation roller at the same time.

•Pre-separation pad — it is recommended that you change the pre- separation pad at least as often as you change the feed module/ separation roller tires.

•Imaging guides — replace when the imaging guides are heavily scratched and defects show in the image.

1.Remove the output tray.

2.Lift up the printer access cover.

3. Open the pod.

A-61555 April 2009 5-15