Image Address information
• Level buttons — when image addressing is enabled, the three image address level buttons will be displayed: Level 3, Level 2 and Level 1. You can increment the image address level by touching one of the level buttons. During a scan session the level button that is highlighted is the level which will be assigned to the next document.
• Next Image Address — the values displayed in the level buttons indicate the image address which will be assigned to the next document.
| Scroll arrows — touch the up or down scroll arrow to display additional |
| functions that are not currently visible on the touchscreen. |
| Settings button — displays the Settings screen where you can set the |
| volume, change the language, set the tone and enable or disable image |
| addressing. |
Operator Log | When you touch Operator Log, the Operator Log screen will be |
| displayed. This screen provides the time, message code and a |
| message description. |
| The messages that are displayed in the log are only those messages |
| that have been posted since the scanner was powered on. When you |
| turn the power off, the Operator Log on the Operator Control Panel |
| touchscreen will be cleared. |
| To view messages which have been cleared from the Operator Control |
| Panel touchscreen, see Chapter 6, Troubleshooting. |
•To clear the operator log, touch Clear.
•After viewing the operator log, touch Close to return to the Idle screen.
|
