Toggle Patch
Image addressing - enabled
Image addressing - disabled
When image addressing is disabled, the Patch Readers are also disabled. However a Toggle patch can still be detected.
Patch Types 2, 3 and T — these patch types are used for image addressing.
The Patch Readers control document level changes by automatically sensing a predefined patch code and changing the document level accordingly.
IMPORTANT: Do not use these illustrated patches for production — they are not to spec.
Patch 2 — assigns a Level 2 to the current document
Patch 3 — assigns a Level 3 to the current document
Patch 5/T/Transfer Patch — assigns a predetermined level to the next document
| The Transfer Patch Definition is also defined by the application. The |
| Transfer Patch Definition controls the level assigned to the next |
| document when a Transfer Patch is used. For example, if the Transfer |
| Patch Definition for the current operation is defined as Level 3 and a |
| Transfer Patch is used, the next document will be assigned Level 3. |
Patch code placement | See Kodak publication |
| information about patch placement and specifications. |
| Patches can be tested using the Patch Test on the touchscreen. See |
| Chapter 3, “Performing a Patch test” for more information. |
|
