2On the SP-250, hold down the TRANSPOSE/FUNCTION button and press the VIBES/GUITAR sound selection button. The LEDs of the TRANSPOSE/FUNC- TION and VIBES/GUITAR buttons will blink, and the SP-250 will wait to receive the data dump.
3Set the data filer to send the sound setting data that were previously saved from the SP-250. Please read the data filer owner’s manual for details on data transmission.
The SP-250 will receive the data.
When the data dump is finished, the SP-250 will return to the same status it was before the data dump.
During a data dump operation, the SP-250 will not produce sound, and no other function will work.
You may cancel a data dump operation before the data dump begins, by pressing the TRANSPOSE/FUNCTION or VIBES/GUITAR button.