Program Change enable/disable. To transmit and receive this kind of data, you must enable Program Change messages transmission and reception. Otherwise, you can disable Program Changes data.
Hold down the TRANSPOSE/FUNCTION button, and press the PIANO 2 sound selection button. Each time you press the switch, the setting will alternate between Enabled and Disabled.
Program Change status | PIANO 2 LED status |
|
|
Enable | Lit |
|
|
Cancel | Dark |
|
|
Note: When the power is turned on, program changes will be enabled for all MIDI channels.
Control Change
When you operate the damper pedal, adjust the balance in Layer mode, or make other adjustments on the control panel, a Control Change message is sent to a con- nected external MIDI device. At the same time,
Control Change enable/disable. To transmit and receive this kind of data, you must enable Control Change messages transmission and reception. Otherwise, you can disable Control Changes data.
Hold down the TRANSPOSE/FUNCTION button, and press the E.PIANO 1 sound selection button. Each time you press this button, the setting will alternate between Enabled and Disabled.
Control Change status | E.PIANO 1 LED status |
|
|
Enabled | Lit |
|
|
Disabled | Dark |
|
|
Note: When the power is turned on, Control Change messages will be enabled on all MIDI channels.
30 | Chapter 5 |
