Korg Sp-500 manual Playing the SP-500, Playing a sound, Turing the power on, Play the keyboard

Playing the SP-500

1.Playing a sound

First let’s turn on the power and play the keyboard to produce sound.

Turing the power on

As described in the connection procedure on p.14, connect the AC/AC power supply, head- phones, and pedal. Then turn on the power of the SP-500.

1	Turn on the power
	Leave the [VOLUME] slider set at about 0.

Press the [POWER] switch located on the rear panel. When you turn on the power, the panel indicators will light, and the startup screen will appear.

Turning the power off

Press the [POWER] switch once again. When the power is turned off, the panel indica- tors will all go dark.

2	Play the keyboard
	While playing the keyboard, gradually adjust the [VOLUME] slider to adjust the vol-

ume.

If you are listening to the SP-500 through your monitor speakers, cassette-radio unit, or audio system, adjust the output volume of this equipment as well.

Adjusting the volume

Raise the [MASTER VOLUME] slider to the middle position. Moving the slider toward the right will increase the volume, and moving it toward the left will decrease the volume. At a position of “0” there will be no sound.

While actually playing the instrument, adjust the volume to an appropriate level.

Softer Louder

Playing the SP-500

23