Korg Sp-500 manual Changing the program name

4	Press the “Copy” button
	The “Custom Copy” page will appear.

5	Select the program that you wish
	to copy
	Press the “Source Prog” cell, and select
	the program you wish to copy to the pro-
	gram that was selected in step 2. Use the
	same procedure as usual when selecting a
	program. (☞ p.24) After making your
	selection, press the [EXIT] switch to
	return to the previous screen.

6	Press the “Copy” button
	The program will be copied, and you will
	return to the “Custom Prog” page.
	To change the program name
	If you wish to change the name of the
	program, press the “Rename” button
	before you write, and change the name.
	☞ “Changing the program name”

7	Write the program
	If this is the program you want, press the
	“Write” button to write it.
	Never turn off the power while data is being
	written.
	If you decide not to write
	Press the “Cancel” button without writ-
	ing, the copied contents will be dis-
	carded, and the data will revert to the
	original program. You will return to the
	main page.

8	Change other programs as well
	Repeat steps 1–7 to collect the desired

programs in the [USER] program group.

Restoring the factory-set condition

Press the “Preset” button. When the con- firmation message appears, press “OK.”

When you restore the factory-set data, the entire [USER] program contents will be lost.

Changing the program name

You can modify the name of a program that you “Write” to the [USER] program group. Press the “Rename” button and modify the filename.

1	Access the “Rename” button
	Press the “Rename” button, and the

“Rename” page will appear.

2	Select a character
	Use the dial or the [VALUE] switches to
	select the first characters.
3	Finalize the first character
	Press the “Set” button to finalize the first
	character.
4	Select the next character
	Select characters as in steps 2 and 3 to
	assign the desired file name.
	A file name of up to 16 characters can be
	assigned.
	To make a correction
	Use the “o,” “k” button to move the
	cursor to the character that you wish to
	correct.
	If you wish to delete the character, press
	the “Delete” button; the character at the
	cursor location will be deleted. If you
	wish to insert a character, press the
	“Insert” button; the selected character
	will be inserted at the cursor location.
5	Finalize the program name
	After you have input the entire program

name, press the “Return” button.

To save the program name, you must per- form the “Write” operation. ☞ Refer to step 7 of “Collecting favorite sounds into a [USER] program group.”

Playing the SP-500

35